I have Bilstein and Dobinsons in mine, heard a lot of good things and no negatives about them so thats the way I went.
I bought the Dobinsons for $285 from 4X4 Solutions in Grimshaw st Bundoora, Vic back in February when they had 15% off.
The Bilsteins came from the US from a guy called Nick, (kolak@aol.com), very helpful and patient bloke on a few US forums. Runs a one man business in modifying Jeeps. He's been doing it for quite a few years.
I just checked my old emails and back in February when I ordered them, the cost on them was $310usd for all 4 shocks and $140usd for shipping.
A few weeks later I then went back to him and ordered a new set of spring isolators all round. They cost $100usd plus an extra $30usd for shipping.
bringing my total cost from him to $580usd, ($552aud). Spring isolators sit to and bottom of each spring and isolate the car from the noise of the spring moving. Over time they can wear down and people have lost more than 10mm in height from replacing these alone.
So the total cost for my lift was $837aud.
I had been quoted $299aud per shock and couldn't get a specific delivery date.
The 5100 Bilsteins are a shock valved specifically for the weight distribution of the WJ/G Grands. I had hearad so many good things about them I couldn't go past them.
You don't need a new sway bar, (stabiliser bar), front or rear unless you want to improve the
on road only handling of the car. The trade off of this is
less off road performance. All the sway bar does is mitigates body roll otherwise know as
articulation. This articulation is what you want more of when off road to keep the wheels on the ground better.
If I was upgrading my sway bar as well I wouldn't get an OME but would go straight to the Addco sway bars. They are the best around. They're $150usd plus shipping.
If you want the best of both worlds, the addco sway bar front and rear with JKS quicker disconnects on the front. These will set you back around $200 inc S&H.
before my lift
http://www.ausjeepoffroad.com/forum/...9&d=1344327455
after my lift
http://www.ausjeepoffroad.com/forum/...0&d=1344327494
Let us know if there's anything else.