Inspiring work. I'm still planning something like this for the KK, just curious what thickness ply did you use and where did you get your drawer sliders from? Cheers.
__________________ 2010 KK Sport, LPG, Mygig, Uconnect, JBA UCAs, 3" CRDstu lift & Uneek bull bar.
At my local Bunnings which is Stafford in Brisbane if you phone the trade counter and order what sheets of ply you require and then give then a cutting list and a couple of days they will cut the sheets to your list and you just call in and pick it all up. No charge for cutting to size.
I would think all stores would do it. With their slide saw they are more accurate the me.
Cheers
Greg
AJOR does not vouch for or warrant the accuracy, completeness
or usefulness of any message, and are not responsible for the contents of any
message. The messages express the views of the author of the message, not necessarily
the views of AJOR or any entity associated with AJOR, nor should any advice
be substituted as technical advice replacing that of a mechanic. You agree,
through your use of this service, that you will not use AJOR to post any material
which is knowingly false and/or defamatory, inaccurate, abusive, vulgar, hateful,
harassing, obscene, profane, sexually oriented, threatening, invasive of a person's
privacy, religious, political or otherwise violative of any law. You agree not to post any copyrighted
material unless the copyright is owned by you or by AJOR. The owner, administrators
and moderators of AJOR reserve the right to delete any message or members for
any or no reason whatsoever. You remain solely responsible for the content of
your messages, and you agree to indemnify and hold harmless AJOR, the administrators,
moderators, and their agents with respect to any claim based upon transmission
of your message(s). The use of profile signatures to intentionally mislead or misdirect any member on this forum is not acceptable and may result in your account being suspended. Any trip that is organised through the AJOR forum is participated
at your own risk. If you or your vehicle is damaged it is your responsibility,
not that of the person that posted the thread, message or topic initiating the
trip, nor the organisers of AJOR or moderators of any specific forum. This forum
and associated website is the property of AJOR. No user data is harvested and no information supplied in your registration will be sold for profit.
diy draws in my jeep kj
2010 KK Sport, LPG, Mygig, Uconnect, JBA UCAs, 3" CRDstu lift & Uneek bull bar.
