Burping fluid like waves on psp reservoir

[Ali112]

Hallo I installed new pump and i bleed it very good,I left the front axle up when i was bleeding the air out from the system the fluid was Quiet with a good level and the fan was working on the airplane mode ECT connector removed and also the steering was great,but when i put the tires again on the ground and install the Ect again exit fan from the airplane mode the fluid on the reservoir start to make waves its look like boiling inside the reservoir and the fan doesnt rotate at all,thanks for the help and respond

[Ali112]

I want some idea my friends

[fester]

Not sure I understand what you mean "airplane mode" "ECT connector removed"????

Was the engine actually hot enough for the fan to trigger and was the power steering working properly.

[drover]

Sounds like air in the lines. Wheels off ground, run engine and turn wheel from lock to lock (not hard) keep lid on PS reservour, air should be gone when no noise from system, fan will only operate when temp is reached. Check socket on that fan valve thingy. (forgot the name )

[Ali112]

Great guys thank you all