WK2 Sump Protection Plate

[4dmad]

Does the bottom part of the bumper still go on with the skid plate on and if so have you got photos with it on?

[bmackin]

Originally Posted by 4dmad

Does the bottom part of the bumper still go on with the skid plate on and if so have you got photos with it on?

Hey 4dmad,

It sure does. Check out post #18 in this thread (http://www.ausjeepoffroad.com/forum/...=126955&page=2) from our test fitting. The products in the photos are prototypes, but you can see them fully installed with the lower air dam in place.

Hope that helps!

Cheers,
Bill

[bmackin]

Hey guys,

I launched the Chief Products website (www.chiefproducts.com.au) yesterday. When you get a chance, check it out and tell me what you think. I'm very interested to hear everyone's thoughts.

Now that we've opened our doors and are actually selling products, I'm also opening a vendor forum here on AusJeep. I'll post a link to it later this week. It will have all of our latest product info and plans as well as some specials for the members here.

Have a great weekend!

Cheers,
Bill

[Chief Products]

Hey guys,

Here's the link to our new vendor forum on AusJeep, (http://www.ausjeepoffroad.com/forum/...play.php?f=277). It's brand new. Feel free to drop in and make a post.

Cheers,
Bill

[First jeep]

Howdy Chief, great to see you up and running. looking forward to ordering a loop and plate but ordering together results in an additional $40 postage. Should I order separately or is that just an issue with the postage calculator? Ps: I'm in WA 6164, and interested in any discounts of course

[Thommo]

Hello Guys,
Plate is in fitted up nicely with the ARB Bar. Just needed to undo the screws, 4 at the bar and 5 underneath and remove the centre ARB protection plate. Take off the existing Jeep plastic cover and then using new longer bolts supplied with the new plate locate the rear first and support the front of the plate. Re fit the ARB plate (takes some jigging about but you'll get there), then using the new supplied bolts and protective washers bolt it all up, refit the ARB bolts and it's a neat job.
I did this with the car on stands and lying on my carport floor, would recomend using a hoist if available.

Originally Posted by Thommo

Hi Bill, GeoffV,
Soon as the website is up I'll order the plate and see how it fits up with pics and any issues if any.

Cheers,
Thommo

[Benn0]

Nice work, looks very tidy with the ARB bar as a pre-runner.