Quote:
Originally Posted by PureCaboose
The stub axle is stuck in the hub? Try wd-40 and a little heat on the hub. If you can put the axle ears in a tub of water or cover it with a wet rag to keep the axle
Greg
|
I soaked it with an excessive amount for an hour. Stuck bad.
I just bought 2 new uni joints Moog 371. They will take a couple of weeks to arrive. Again from Amazon for a great price. What's everyone's experience with Moog quality?
Going to drain diff and remove both axles next weekend. Then I can fit new wheel hub and not risk the old one collapsing.
Going to possibly attempt to cut old hub off axle with a 9 inch grinder. It won't be pretty but if it's clamped down well I should be safe. Even if I don't cut all the way through I should massively reduce the amount of pressure required to press it off. I have access to a 20 ton press most of the time.