Quote:
Originally Posted by Sockeye
It will work.
Depending on the lengths of the input gear and number of splines you might need to swap the input gear from the dead TC.
Another culprit could be the drive shaft length and yoke compatibility. But all this sure has been done before.
http://jeephorizons.com/tech/tcase.html
|
already done and working
, but the problem I have now is the bugger has a code 45 (the good old overdrive solenoid) and I may as well do the pressure solenoid while im there , but problem I have is locating one .
when I live in rural , it really is rural .