WK2 Nudge Bar

[2bad4u]

Not on a Chief nudge bar, but I have on my TJM nudge bar. I used the existing tabs to mount the light bar and then a 3 inch bracket for the aerial.

[Chief Products]

Originally Posted by Jamie888

Has anyone mounted a light bar AND a UHF of this nudge bar?

Hey Jamie,

We've had a lot of customers do this with our WK2 Nudge Bar. Most mount a 20" light bar with the antenna mounted at the end. If you wanted to go with a 22" light bar, you could use a O type mounting clamp on the side bar. Personally I prefer the 20" setup with everything up top.

I hope that helps! if you have any questions, don't hesitate to shoot me a message.

Cheers,
Bill

[Jamie888]

Thanks for the quick response Bill!

I currently have the 22" supercentre light bar. What 20" do you recommend that will still allow me to mount the antenna?

[antonsd]

I have the Chief WK2 nudge bar with a 21inch light bar above it. Love the look and the height of the light bar definitely lights up far and wide. Pics below if it helps anyone with their decision.

Sent from my ANE-LX2J using Aussie Jeep Offroad mobile app

[Chief Products]

Originally Posted by Jamie888

Thanks for the quick response Bill!

I currently have the 22" supercentre light bar. What 20" do you recommend that will still allow me to mount the antenna?

I'm currently running a 20" dual row light bar from HardKorr Lighting. I'm not sure if they offer it anymore. I checked their website and it looks like they only offer a 22" now. I'm not sure where would be the best place for 20" bar. The main thing to look for would be if the feet go on the ends or on the back. If they're on the ends they could take up more space and make mounting the antenna more difficult.

I hope that helps!

Cheers,
Bill