jk crd cambelt wrangler 2010- 105k
Hi guys. Have just done my cam belt & I would say it is one of the easiest I have accomplished compared to other cars. The washer bottle comes straight upwards after undoing one bolt. the two serpentine pulleys don't need to be removed, left hand thread as mentioned in this forum. the cam shaft does not move when removing belt. So no cam locking tools needed. But mark all pulleys with ceramic white paint for timing which is what I used.The hardest was removing the fan cover & I decided to cut the cover in half before re installing. In the photo I cut the steel bracket at the bend, so it gave me two steel brackets to work with. I used 2 copper rivets to fasten the steel bracket to the bottom cover & created a thread in the top bracket so I would not need to use a nut to the bolt. But you can use a bolt & nut if required. This mod is a must & easy to do & makes reassembly easy. The fan cowling is as stiff as before & there is no flexing. Please do this mod as it makes future access to the front of the motor easy & simple. I have also put led headlight bulbs , plug & play & rear lights as per photo. Front bulbs pass WOF as they are the same shape as halogen & produce brilliant white light with perfect beam on dip & high beam.
|