Note: cannot get dropbox to link individual pics so each pic is under each paragraph below, so dumping em all with AJOR upload. You'll work it out
Scored on sale a GME UHF 4x4 setup pack. Cool, except no where to mount the antenna due to no mounting bracket available anywhere useful except rear tail light and need drilling etc.
As I have no need or want for a bullbar, therefore no obvious mounting place for said antenna, I was at a loss due to the stupid curving/overlapping rounded bonnet closure the KK uses to where to have a good solid mount.
So I removed the fake side vent, 10mm socket on a bolt I'm using to mount bracket:
and found with bonnet closed I can literally finger into the engine bay:
So with a 3 dollar something bracket from bunnings, I persuaded with impact force a 3mm flat bar into a shape with some very special tools:
And does not even touch the body work because, finder sized hole with fake ass vent removed:
Finished pics, completely level and strong:
In doing this, I think I have found a nice ingress place for a snorkel. Plenty of room for someone to fit one I think with not much metal removal. I'd shift my 3 dollar mount to the other side and snorkel in there as air box is this side.