Sorry for the delay on the finished photos but the weather has been really crap and I wanted to give it a cut and polish first. Not quite done with that yet and will take some more shots with my better camera next week.
As you can see not much sticking forward. Would be the same as a stock bumper.
The power steering cooler is all plumbed in now to after I bent up some mesh to go between the that and the bar. The lines were run to the return line which is not under pressure. I had already cut this line to add an inline filter to it so any wear particles don't keep circulating wearing things even faster.
A lot of work went into it but enjoyed doing most of it and happy with the end results.
I also just dropped the price on my former ARB bar with the same hitch setup in it to get it out of the way for $590 or $450 USD. to anyone who would like a piece of my work.