Look what I just finished getting together for the front D30.
I designed the brackets in CAD and had them laser cut and then machined up some bosses that were then tig welded on to them. It was then all plated. The braided stainless steel brake lines ( longer than stock for lifted Jeeps ) are custom made with the Ford metric fitting for the caliper and the Jeep at the other end. Brackets to hold them are out of stainless steel. The calipers are the new design twin piston Ford BA Falcon brakes by PBR and look the same as the 2006 Mustang with 300 mm slotted rotors. The pads are a police special compound. All bolts needed as well.
The company that got me all the contacts and paid up front for the things used are going to sell them as a complete kit as shown. There will be no welding necessary but cutting off the old caliper brackets will need to be done.
Will start fitting them tomorrow but am waiting on some new hubs that I want to change at the same time to arrive this week I hope. Otherwise will put them together with the old ones and fit the new hubs later.
There will also be a 325 mm rotor with special FPR calipers option too but you will need 17" wheels for that. I think these are just going to fit into 15" rims so long as the BS is around 3.75".
What do you all think? Total price will be around $700 AUD plus freight. The company ( Competition Engineering ) be happy to have distrubutors too if anyone is interested?