Finally put my SOLID diff covers on the XJ.
The only snag i had was putting on the front d30 cover, i had to cut the top right side rim down, so the phrod doesnt hit the cover!
Yeh i had the same problem with mine.Cover had to be grinded to clear panhard as well.Mine were just all grey,how did you get the black with red logo?
Yeh i had the same problem with mine.Cover had to be grinded to clear panhard as well.Mine were just all grey,how did you get the black with red logo?
i sprayed the covers with black hi-temp engine paint, then used a car touch up pen in red for the logo.
i didnt like the grey colour, look to funny on the diffs.
Not quite today but in the past couple of weeks I have stripped off the bits from the motor, pulled motor and gear box out, replaced the starter motor, put bits back onto engine and fitted engine back into car.
Hi well didnt do this today but did it last night so thought this morning is close enough, i followed Gojeeps way with using an old leaf pack (thanks to theooz) to add a second main leaf (thanks heaps for the ideas and lots of pics Gojeep) gained 50mm both sides, havnt taken it for a drive yet but lookin forward to see what its like.
AJOR does not vouch for or warrant the accuracy, completeness
or usefulness of any message, and are not responsible for the contents of any
message. The messages express the views of the author of the message, not necessarily
the views of AJOR or any entity associated with AJOR, nor should any advice
be substituted as technical advice replacing that of a mechanic. You agree,
through your use of this service, that you will not use AJOR to post any material
which is knowingly false and/or defamatory, inaccurate, abusive, vulgar, hateful,
harassing, obscene, profane, sexually oriented, threatening, invasive of a person's
privacy, religious, political or otherwise violative of any law. You agree not to post any copyrighted
material unless the copyright is owned by you or by AJOR. The owner, administrators
and moderators of AJOR reserve the right to delete any message or members for
any or no reason whatsoever. You remain solely responsible for the content of
your messages, and you agree to indemnify and hold harmless AJOR, the administrators,
moderators, and their agents with respect to any claim based upon transmission
of your message(s). The use of profile signatures to intentionally mislead or misdirect any member on this forum is not acceptable and may result in your account being suspended. Any trip that is organised through the AJOR forum is participated
at your own risk. If you or your vehicle is damaged it is your responsibility,
not that of the person that posted the thread, message or topic initiating the
trip, nor the organisers of AJOR or moderators of any specific forum. This forum
and associated website is the property of AJOR. No user data is harvested and no information supplied in your registration will be sold for profit.
O2 sensors fixed the problem
