Yes indeed. plug can be central on the chassis/rear bar, 1 wire goes to LHS blinker, 5 go to RHS blinker/tail/brake etc & your done. If your kit or home made job is 7core you'll have 2 wires left over, generally noted as aux/rev or electric brake on the instructions. nothing more unless you need aux power for some other purpose.
If you needed aux power you would run a 6mm min cable from the front of the car as to not lose voltage. I'll be doing that soon to connect up rear bar built in LED lights & work light etc.
__________________
AKA - TONKATUFF-CRD
Anvil Rubi :) 35" Evan Walkers, LOD bar, Warn Powerplant & lots to come
|