What have you done to your JK this week? 2.5M Views

[Cherokee30D]

Had my original muffler replaced with an Aussie made 'Hurricane' stainless muffler. Beefy sound and better breathing.
My exhaust man commented that the original 2 1/2 system is fine and not worth spending the money to alter......

Here are the two mufflers together:


And the finished install:




Cheers, Craig

[dom83]

Finally got around to installing another ram mount for the ipad in the JK. I used a through mount ram ball with a sleeve and a ruber washer to go in place of the bolt for the centre latch on the hard top. This is the result.

Looks lower than it is but basically sits level with the rearview mirror. Cant see out my rear window due to the child seat, cargo net and aev carrier with spare so no issue for me.


Sent from my SM-G900I using Aussie Jeep Offroad mobile app

[tomzilla]

Installed the 12,000 winch, an auto trans cooler and also mud tyres

[Wazza D]

Carried out yet another tie rod straightening and front end alignment. (I really should get around to doing something about this problem)
All ready to go out and bend something again.

[Nanook]

I'm impressed that you actually have a dedicated rod straightener mounted in your driveway!

[Kiwi Jeeper]

Lift kit finally turned up (thanks FedEx). AEV 2.5" XT dual sport.



A couple of questions. It has brake line brackets, are they needed on a lift of this size? If I do need them, then what about changing the lines to longer ones.

Front track bar? No brackets or anyother change. Is that correct for RHD?

Anybody with experience with both of these on RHD? I can wait and do it properly.

[multihull]

Originally Posted by Kiwi Jeeper

Lift kit finally turned up (thanks FedEx). AEV 2.5" XT dual sport.

Attachment 73779

A couple of questions. It has brake line brackets, are they needed on a lift of this size? If I do need them, then what about changing the lines to longer ones.

Front track bar? No brackets or anyother change. Is that correct for RHD?

Anybody with experience with both of these on RHD? I can wait and do it properly.

Yes fit the brake line drop brackets and then you don't need longer brake lines, these solve that issue.
I have a AEV 3.5" lift with a high steer kit but this is not required for the 2.5" lift. Sorry not sure about the track bar.