Quote:
Originally Posted by JGW
Sounds good but there will be some side forces on the HiLift. I know it's good for vertical compression and tension but what about shear and flex by load on the gantry. I'm not sure what type of material the HiLift is made of but looks brittle though.
|
Yep, you're right. Just done some checks.
If I wanted to make one I could utilize the jack mount, without the jack mounted, to take a weight of 250 Kg @ 1 Mtr, but it would be a cumbersome contraption, not so easy to carry or stow.
Back to the drawing board.
The system would be more suited to removing the top at home, something that I at least, don't need.
Ah well.