thanks mate
it rides a hell of alot better
the old bilsteins were shagged the top of the shockie the collar had removed itself from the body of the strut
and wasn't doing much dampening the springs had sagged about as far as they could
it has almost bed in and when i place a level on the roof racks it's 3mm higher at the front i wanted the racks to be flat as i will be using this for our roof top camper when we do the cape next year in the variety qld 4x4 club bash so with a little more bedding it should sit exactly level
the measurements before lift was 490mm from centre of hub to edge of wheel arch
now it is 578mmfront measurement
i should mentioned that i have H/D top strut mounts aswell which give approx .5 - 1" of lift aswell over the stock ones
i am pretty happy with it all so far just have to do a retighten on the front end as it has made a little bit of room from bedding in and has a lite rattle or it could just be lower control arm bushes which looked ok when i fitted the lift but i'm sure i will nut it out