I was thinking brake, or the disc shield on the inside. But the pads are all still good (5+mm on them), as are the new drum linings (2-3mm).
It only does it, like NTRubicon said, on sweeping curves. It sounds rotational, like something rubbing on the shield, but I couldn't see any signs of anything rubbing anywhere. And why would it only do it on right curves?
I'll check the diff levels, as they certainly show signs of leaking, but not enough that I would think the level is low. Have to get some good sealant for the hats.
I did notice that the boot on the rear sway bar link was torn, though. But while I have heard rattles from the front ones when they were loose, or squeaks from body roll, that isn't the sound I'm hearing. It's too regular when I can hear it.
__________________
Jeeps: Lego for grownups!
|