PPM High steer drag link installation - HELP - AUSJEEPOFFROAD.COM Jeep News Australia and New Zealand

Go Back   AUSJEEPOFFROAD.COM Jeep News Australia and New Zealand > JEEP GARAGE > JK Wrangler Australia
Reload this Page PPM High steer drag link installation - HELP
Register Forums Trading Your Jeep My Garage Mark All Read

Post New Thread  Reply
 
Thread Tools Search this Thread
  #1  
Old 12-08-2011
1NKOGNETO's Avatar
1NKOGNETO  1NKOGNETO is offline
CrawlerStar
  
Join Date: Mar 2011
Location: Perth... WA
Posts: 366
What Jeep do I drive?: JK
Likes: 1
Liked 2 Times in 2 Posts
Default PPM High steer drag link installation - HELP
Guys,

Looking for someone in the Perth region that may have fitted a PPM
High steer drank link + flip adaptor kit... OR similar

Looking for someone thats confident to either do the job for me for cash or cans or give me a helping hand. I've already done my rear track bar relocation bracket. Will do the front one also & LCA's but not overly confident doing the drag link. Details of the unit are below.

Vic @ SBR if your reading this, is this something you can help me with? Not sure what setup you run at your shop when it comes to installation of all your gear...

http://www.doubleblackoffroad.com/main.php?pg=1
SKU: PPM-8001

Cheers, Wayno...
__________________
AKA - TONKATUFF-CRD

Anvil Rubi :) 35" Evan Walkers, LOD bar, Warn Powerplant & lots to come
  #2  
Old 13-08-2011
Mud'N'Guts's Avatar
Mud'N'Guts  Mud'N'Guts is offline
Established Member
  
Join Date: Jun 2010
Posts: 246
What Jeep do I drive?: JK
Likes: 0
Liked 0 Times in 0 Posts
Default
Yeah what reyzor said. It can be done pretty easy, but it does take a while. Keep the drill perpendicular to the ground and try to make sure it doesn't chatter. The hole doesn't have to be perfect because the sleeve makes any problems irrelevant.
  #3  
Old 13-08-2011
1NKOGNETO's Avatar
1NKOGNETO  1NKOGNETO is offline
CrawlerStar
  
Join Date: Mar 2011
Location: Perth... WA
Posts: 366
What Jeep do I drive?: JK
Likes: 1
Liked 2 Times in 2 Posts
Default
Thanks guys, ive had a good look at the setup and confident I will be able to do it myself. I had the wrong idea of the drilling part, hadn't looked at the sleeve and thought it had to be tapped? Anyway will get it done on my next free day. LCA's are in!
__________________
AKA - TONKATUFF-CRD

Anvil Rubi :) 35" Evan Walkers, LOD bar, Warn Powerplant & lots to come
  #4  
Old 15-08-2011
double black offroad's Avatar
double black offroad  double black offroad is offline
not just a web wheeler
  
Join Date: Jul 2007
Location: melbourne
Posts: 2,645
What Jeep do I drive?: JK
Likes: 2
Liked 9 Times in 4 Posts
Default
Get onto Roger at Only One 4wd, he is our dealer there. 0432675412
  #5  
Old 15-08-2011
1NKOGNETO's Avatar
1NKOGNETO  1NKOGNETO is offline
CrawlerStar
  
Join Date: Mar 2011
Location: Perth... WA
Posts: 366
What Jeep do I drive?: JK
Likes: 1
Liked 2 Times in 2 Posts
Default
Have done thanks guys. Tried Bill on the weekend but must have been out bush? Spoke to Roger on the tracks & have myself sorted. Cheers...
__________________
AKA - TONKATUFF-CRD

Anvil Rubi :) 35" Evan Walkers, LOD bar, Warn Powerplant & lots to come
  #6  
Old 15-08-2011
MightyMouse's Avatar
MightyMouse  MightyMouse is offline
No Winching
  
Join Date: Aug 2009
Posts: 3,458
What Jeep do I drive?: JK
Likes: 98
Liked 504 Times in 291 Posts
Default
A low speed drill is an advantage when drilling such a large hole......... especially when finally breaking through.

Keep the drill held tight !
__________________
It seemed like a good idea at the time........
Post New Thread  Reply

« Previous Thread | Next Thread »


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is On




All times are GMT +10. The time now is 06:38 PM.


Advertisements


www.ausjeepoffroad.com - Archive - Top


AJOR does not vouch for or warrant the accuracy, completeness or usefulness of any message, and are not responsible for the contents of any message. The messages express the views of the author of the message, not necessarily the views of AJOR or any entity associated with AJOR, nor should any advice be substituted as technical advice replacing that of a mechanic. You agree, through your use of this service, that you will not use AJOR to post any material which is knowingly false and/or defamatory, inaccurate, abusive, vulgar, hateful, harassing, obscene, profane, sexually oriented, threatening, invasive of a person's privacy, religious, political or otherwise violative of any law. You agree not to post any copyrighted material unless the copyright is owned by you or by AJOR. The owner, administrators and moderators of AJOR reserve the right to delete any message or members for any or no reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold harmless AJOR, the administrators, moderators, and their agents with respect to any claim based upon transmission of your message(s). The use of profile signatures to intentionally mislead or misdirect any member on this forum is not acceptable and may result in your account being suspended. Any trip that is organised through the AJOR forum is participated at your own risk. If you or your vehicle is damaged it is your responsibility, not that of the person that posted the thread, message or topic initiating the trip, nor the organisers of AJOR or moderators of any specific forum. This forum and associated website is the property of AJOR. No user data is harvested and no information supplied in your registration will be sold for profit.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.

AJOR © 2002 - 2024 AUSJEEPOFFROAD.COM. All corporate trademarked names and logos are property of their respective owners. Ausjeepoffroad is in no way associated with DaimlerChrysler Corporation or Fiat Jeep.
www.ausjeep.com www.ausjeep.com.au www.midlifemate.com ausjeepforum.com www.r9kustoms.com
vB Ad Management by =RedTyger=