|
|
17-02-2014
|
|
Full Flexer
|
|
Join Date: Sep 2012
Location: Sydney
Posts: 682 What Jeep do I drive?: JK
Likes: 31
Liked 108 Times in 77 Posts
|
|
Grab bar ram mount for MY13
Here is how i installed the RAM ball in my JK.
First as everyone knows the bolts on the front of the grab bar only screw into the decorative trim which is only held in by clips so you cant mount directly to this.
What i did was remove this trim and then remove the inner bolt which takes out the grab bar. I used a tap to thread the dash to suite an m8 and replaced that bolt with an m8 one then i bent up a piece of aluminium.
I used a tap to thread the front end of the alloy to accept the new m8 bolt that i have installed through the ram ball and the decorative trim. This was because the hole in the trim is offset to the bolt hole in the dash so you can not just add a longer bolt through the two of them.
Then cut a piece of alloy tube to act as a spacer so i could clamp down the bolt and all finished. I added the spacer as i found that you could not putt enough pressure on the bolt/ram ball with out pushing the trim into the grab bar and it looking odd.
Seems like a lot of mucking around just to mount a tablet but i wanted a solid mount that did not attach to the window and did not really want to add anything inside the cab. Yeah i know i am just fussy.
Ram ball part number:
RAM-B-367U
Can be sourced from any reseller check the Ram web page for resellers.
__________________
Cheers Dom
MY13 JKU Manual Billet Silver Rubicon,Leather,SAT/NAV,Towbar,AEV-Front-Bar
Last edited by dom83; 17-02-2014 at 02:07 PM.
|
17-02-2014
|
|
Full Flexer
|
|
Join Date: Sep 2012
Location: Sydney
Posts: 682 What Jeep do I drive?: JK
Likes: 31
Liked 108 Times in 77 Posts
|
|
Re: Grab bar ram mount for MY13
Sent from my HTC One XL using Tapatalk
__________________
Cheers Dom
MY13 JKU Manual Billet Silver Rubicon,Leather,SAT/NAV,Towbar,AEV-Front-Bar
|
17-02-2014
|
|
AJOR Silver
|
|
Join Date: Oct 2011
Location: Blue Mountains
Posts: 1,401 What Jeep do I drive?: KK
Likes: 150
Liked 110 Times in 80 Posts
|
|
Looks good, your solution was quite straight forward and easily reversible should the Jeep be on sold. Also it looks factory the way you've built it. Wish I could do that in my KK.
__________________
2010 KK Sport, LPG, Mygig, Uconnect, JBA UCAs, 3" CRDstu lift & Uneek bull bar.
|
17-02-2014
|
|
SwampDigger
|
|
Join Date: Apr 2006
Posts: 3,504
Likes: 3
Liked 143 Times in 102 Posts
|
|
Grab bar ram mount for MY13
I'm loving the position and how solid the mount is on currogations.
Last edited by MRGC; 17-02-2014 at 10:22 PM.
|
18-02-2014
|
|
Full Flexer
|
|
Join Date: Sep 2012
Location: Sydney
Posts: 682 What Jeep do I drive?: JK
Likes: 31
Liked 108 Times in 77 Posts
|
|
Thanks guys, yeah it works really really well and I think looks great and hardly noticeable when the cradle is not mounted whish is what I was after.
Sent from my HTC One XL using Tapatalk
__________________
Cheers Dom
MY13 JKU Manual Billet Silver Rubicon,Leather,SAT/NAV,Towbar,AEV-Front-Bar
|
21-07-2014
|
|
Rated the trail
|
|
Join Date: Oct 2008
Location: Sydney
Posts: 1,491 What Jeep do I drive?: JK
Likes: 0
Liked 24 Times in 20 Posts
|
|
Quote:
Originally Posted by dom83
Thanks guys, yeah it works really really well and I think looks great and hardly noticeable when the cradle is not mounted whish is what I was after.
Sent from my HTC One XL using Tapatalk
|
Ordered parts today mate, guess you're coming round to help me do this!! or I can come to you!!
__________________
You'll face many defeats in life.... never let them defeat you...
|
21-07-2014
|
|
Full Flexer
|
|
Join Date: Sep 2012
Location: Sydney
Posts: 682 What Jeep do I drive?: JK
Likes: 31
Liked 108 Times in 77 Posts
|
|
Lol. Should have asked me I still got three of the ball mounts in the garage.
Sent from my HTC One XL using Tapatalk
__________________
Cheers Dom
MY13 JKU Manual Billet Silver Rubicon,Leather,SAT/NAV,Towbar,AEV-Front-Bar
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is On
|
|
|
All times are GMT +10. The time now is 10:41 AM.
|
|
|
|
Advertisements
|
|
|