Cruise Control will only activate if all is working OK within the vehicle.
This means that:
* There is no MIL light on AND that there are no error messages - these may not cause the MIL to light.
* The brake light switch is not ON
* The vehicle is above the min set speed for cruise
* The vehicle is in high gear (cruising?)
Checks:
* Brake lights are not on AND that they actually work
* In REV do the reversing lights come on (CAUTION CHECKING HERE)
* Any codes in the ECU
Happy Trails
__________________
There are 4 wheel drives, and there are Jeeps... seems I found out too late in life.
|