Unsure if this is forum etiquette OK, so happy to delete if not OK.
I have fitted some road tyres as the noise of the muddies was getting a bit much and now 99.9% of my driving is just around town with maybe 1x on-road trip a year since the pandemic closed down my Nat Parks volunteer work program.
So I needed 5x more TPMS Sensors for the original 18in alloy wheels (Limited) as the original sensors are now in my steel wheels with the muddies. I also wanted to see if I could get metal valve stems that could take the TPMS Sensors, as I was being charged $9ea x5 for replacement rubber valve stems each tyre change.
Came across these guys located on the Gold Coast in QLD.... Very helpful, well priced ($119 for
5x Sensors & Rubber valve stems!) and they confirmed the KK is different to the Wrangler sensors. They match the part number that is marked on my original Sensors.
https://tyresensorfactory.com.au/sho...HR-TYR-SET-OF1
https://tyresensorfactory.com.au/sho...lve-stems-30mm
I had to buy two sets of 4x each alloy valve stems, so the next 3x people who ask can have one of my spares to make 5x. (They don't sell a pack of 5). And I have 5x new rubber valve stems ready for when I next change my mud tyres in the steel wheels. It's a pity the don't come with metal valve caps but $4.07 on AliExpress and some nice knurled polished alloy caps are on the way.
They are all fitted now and read spot on compared to my accurate low pressure (0-50psi) gauge I use after airing down my off road tyres.
And I'll be be happy to accept any 'Finders fee' if you use the '
Trade30' discount coupon they sent me with my order to use for my next purchase. Unlikely that I will have another order as I have everything I want now and I paid FULL PRICE!!
I've yet to put any considerable km on them but no problems at all since Thursday when they were fitted.