Quote:
Originally Posted by Gojeep
Would you be able to lay a stock arm on top of the new A arm and measure the difference between them? Like to know just how much longer they are. They make a different one for lowering too which are longer as well but would have the ball joint angle the other way I presume.
|
Sorry they're already installed. Here's two photos. The upper ball joints are far larger and stronger. They are a pain to install if you follow the instructions. You're better off disconecting the top of the strut to remove the control arm bolts and to get to the rear bolts on each side you can parcially remove the inner plastic guard for easy access to this rear bolt nut.