2.5 TD Big bore exhaust photos ?

[baksidar]

Hi,
Thinking of changing the exhaust on the TD to a 3" system from the turbo
downpipe back.
Has anyone got any pics of theirs,to give me some ideas either with or without the muffler fitted and also with the standard / modded downpipe.

Was planning on doing the downpipe internal mod at a later date ,
just wanted to do this first and see if it made any difference.

No fueling mods have been done ,i take it that will be ok.

[mud_slut]

Off the top of my head grandpa spec has a 3" straight pipe from the back of the dump and MM has either a 2.5" or 3" with a muffler.

Pics unfortunately I can't help you with.

[baksidar]

Thanks,
I've got a feeling that my system had been hacked about before
I bought it,
Because there's 2 connectors between the dump pipe and the
flexy that's why I was so interested in the photos.

[Deezelweazel]

Stock is good up to 150hp. Remove the muffler if you need less pressure.
Stock backpressure should be between 70 and 120 millibar.
Have a mandrel bent SS exhaust replacement from the down pipe with a diameter of 2 1/4".
The IHI will not spool up significantly quicker-you need a 10 blade impeller to achieve that.
Just seen from the performance side...

[baksidar]

Ok so better to do the down pipe mod first then ?

[Mudmonster]

I have a full 3" from the dump pipe back. You will not fit a 3" dump pipe. There is no room. I've made a 2.5" stainless dump pipe. Just need to fit it. I have a thread in here if you want to see some pics

[grandpa_spec]

Yep mines same, 3" no mufflers from just below the dump pipe